If your cabinets are still strong and functional but look dated or worn out, you don’t need a full renovation. Replacing only the cabinet doors and drawer fronts can instantly transform your space — for a fraction of the cost and time of a complete remodel.
It’s a simple, cost-effective project that can even be done DIY-style, without hiring a tradesperson.
1. Check If Your Cabinets Are in Good Condition
Before ordering new doors, make sure your cabinet carcasses are still solid. Open the doors and inspect inside carefully for:
- Water or moisture damage (especially under sinks)
- Mould or discolouration
- Cracks, swelling, or sagging panels
- Loose hinges or structural movement
If the carcass feels sturdy, dry, and level, you’re good to go — new doors will make it look brand new again.
- Water or moisture damage (especially under sinks)
- Mould or discolouration
- Cracks, swelling, or sagging panels
- Loose hinges or structural movement
If the carcass feels sturdy, dry, and level, you’re good to go — new doors will make it look brand new again.
2. Measure Correctly
Accurate measurements are key for a perfect fit. Use a tape measure to record:
- Height and width of every door and drawer front
- Opening side (hinges on the left or right)
- Hinge hole positions if you’re reusing your existing hardware
Pro tip: Standard hinge holes are 35mm in diameter, usually placed 3–5mm from the door edge. If unsure, eKitchens can pre-drill your hinge holes for a perfect fit.
- Height and width of every door and drawer front
- Opening side (hinges on the left or right)
- Hinge hole positions if you’re reusing your existing hardware
Pro tip: Standard hinge holes are 35mm in diameter, usually placed 3–5mm from the door edge. If unsure, eKitchens can pre-drill your hinge holes for a perfect fit.
3. Choose Your Door Style and Finish
At eKitchens, you can choose from over 200 colours and finishes, all made to measure in Perth.
Popular options include:
- Laminate / Melamine: Affordable, durable and easy to clean — available in matte, gloss, or textured styles.
- Vinyl Wrapped (Thermoformed): Perfect for Shaker profiles and classic designs, seamless and moisture-resistant.
- Acrylic: Sleek, high-gloss mirror finish for a premium modern look.
- Painted (Water-Based): Eco-friendly, custom colours with a smooth, professional finish.
- Raw MDF: Ideal if you prefer to paint or finish onsite.
Pro tip: Mix finishes for a designer look — try white Shaker uppers with timber-look laminate bases.
Popular options include:
- Laminate / Melamine: Affordable, durable and easy to clean — available in matte, gloss, or textured styles.
- Vinyl Wrapped (Thermoformed): Perfect for Shaker profiles and classic designs, seamless and moisture-resistant.
- Acrylic: Sleek, high-gloss mirror finish for a premium modern look.
- Painted (Water-Based): Eco-friendly, custom colours with a smooth, professional finish.
- Raw MDF: Ideal if you prefer to paint or finish onsite.
Pro tip: Mix finishes for a designer look — try white Shaker uppers with timber-look laminate bases.
4. Reuse or Upgrade Your Hardware
If your existing hinges and drawer runners are in good condition, you can reuse them.
Otherwise, upgrade to soft-close hardware for a smoother, quieter experience.
Don’t forget to check your handle hole spacing (centre-to-centre) if you’re keeping your old handles — or take the opportunity to modernise with new hardware.
Otherwise, upgrade to soft-close hardware for a smoother, quieter experience.
Don’t forget to check your handle hole spacing (centre-to-centre) if you’re keeping your old handles — or take the opportunity to modernise with new hardware.
5. Install Your New Cabinet Doors
Replacing cabinet doors is a straightforward project:
1. Remove existing doors and label their positions.
2. Mark and pre-drill hinge holes (if not pre-drilled).
3. Attach hinges to your new doors.
4. Clip the hinges into the cabinet frame.
5. Adjust for perfect alignment using the hinge screws.
6. Install handles or knobs.
Most DIYers can replace all kitchen doors in just one day.
1. Remove existing doors and label their positions.
2. Mark and pre-drill hinge holes (if not pre-drilled).
3. Attach hinges to your new doors.
4. Clip the hinges into the cabinet frame.
5. Adjust for perfect alignment using the hinge screws.
6. Install handles or knobs.
Most DIYers can replace all kitchen doors in just one day.
Why Replacing Only the Doors Makes Sense
✔ Save thousands compared to full cabinet replacement
✔ Minimal disruption - no plumbing or electrical work needed
✔ Quick upgrade - fresh look in a day or two
✔ Eco-friendly choice - reuse existing materials
✔ High visual impact - feels like a full renovation at a fraction of the cost
Avoid Common Mistakes
- Double-check every measurement before ordering
- Leave 2–3mm clearance between doors for smooth opening
- Don’t drill freehand - use a hinge template or request pre-drilled doors
- Seal moisture-prone areas (like under the sink) with silicone
Order Custom Cabinet Doors with eKitchens
At eKitchens, all our cabinet doors are custom-made in Western Australia, built to your exact sizes — no modular limits.
Choose from Laminex, Polytec, Acrylic, Vinyl, or Water-Based Painted finishes, available flat pack or pre-assembled.
We can even drill hinge holes and prepare your doors for easy DIY installation, or supply everything ready for your cabinet maker.
Choose from Laminex, Polytec, Acrylic, Vinyl, or Water-Based Painted finishes, available flat pack or pre-assembled.
We can even drill hinge holes and prepare your doors for easy DIY installation, or supply everything ready for your cabinet maker.
📩 Send your measurements and details to sales@ekitchens.com.au
📞 Call us on (08) 9456 3108
🌐 Visit www.ekitchens.com.au
Our locations
Visit our showrooms
